Metallic Capacitor Cover

Sizes available: (mm)
Material: Aluminum or Tinplate
Diameter: Ф30~116
Number of terminal: 2 to 7
Number of blade: 2 to 4

1.Terminal and rivet should well be connected with minimum pull capacity of 40N.
2.Terminal should have loading of 0.5N torque, twist angle range within 2 degrees.
3.Silica gel property on seal is fine, no craze.
4.Cover board and terminal can support 3000 VAC, 10s, no breakdown.
5.The insulation resistance between soldering slice and tinned steel should be greater than 5000MΩ.

Note: Exceptional specifications can be produced on consultation.